Disposal Of Ashes - Ashley AP5660 Mode D'emploi

DISPOSAL OF ASHES

Ashes should be placed in a steel metal container with a tight fitting lid. The closed container of ashes should
be placed on a non-combustible floor or on the ground well away from all combustible materials, pending final
disposal. If the ashes are disposed of by burial in soil or otherwise locally dispersed, they should be retained in the
closed container until all cinders have been thoroughly cooled. Do not place other waste in the same container.
SMOKE AND CO MONITORS
Burning wood naturally produces smoke and carbon monoxide(CO) emissions. CO is a poisonous gas when
exposed to elevated concentrations for extended periods of time. While the modern combustion systems in
heaters drastically reduce the amount of CO emitted out the chimney, exposure to the gases in closed or confined
areas can be dangerous. Make sure your stove gaskets and chimney joints are in good working order and sealing
properly to ensure unintended exposure. It is recommended that you use both smoke and CO monitors in areas
having the potential to generate CO.
Your decorative logs should come in place, however if this is not the case the following steps depicts the correct
location.
Burn Pot
18
Maintenance
Decorative Log Placement
STEP 1
Locate the Burn Pot.
Above are the decorative logs in there correct location.
STEP 2
Place log into correct position.