Vexve AM20-W Guide D'utilisation page 42

Symbols on the room unit display
42
room unit is transmitting or receiving data
daytime programme
night-time programme
weekly programming
rotation direction of the valve (opens clockwise or counter-clockwise)
displayed in connection with the supply water temperature limits
Additional annotations such as "OK". These are used to display func-
tion durations.
CT - constant temperature control
1/3 of the battery capacity left. When this symbol is displayed, you
should install new alkaline AA batteries in the room unit.
The room unit has a memory that stores the system settings while the
batteries are being replaced.
the temperature measured by the indoor sensor or the supply water
sensor in Celsius
floor heating
radiator heating
NOTE! The letters "CT" at the
top of the display indicate con-
stant temperature control.
Additional annotations for displaying the desired temperature at 0.5
degree intervals.
radio signal strength
user menu
setup menu
ECO mode
HOLIDAY mode
The heat symbol of three wavy
lines is displayed when heating is
required. In the summer, the lines
disappear when the controller has
closed the valve.
www.vexve.com