Vexve AM20-W Guide D'utilisation page 34

Installation on Vexve AMV and
Termomix valves
Vexve AMV series:
A pin is preinstalled at the left edge of the valve,
and only the Termomix adapter from the instal-
lation kit is installed on the stem. The pin can be
installed on the other side as required by the posi-
tion of the motor.
NOTE! There are installation kits available
also for other manufacturers' valves!
E.g. Installation kit for the Esbe VRG valve
(product number 1920117).
34
Termomix valves and AMV and
ABV series valves with four-point
fastening:
Install the correct rotation-preventing screw and
adapter from the installation kit.
www.vexve.com