Tips For Use; Maintenance And Environmental Protection - Meister HP10 Mode D'emploi

Tips for use

Setting time is ca. 30 sec. ca. 90 % of the
adhesive force already after one minute. The
setting time can become lengthened through the
processing of thick drops of glue, or shortened
through the processing of small amounts of glue.
Large areas should be glued not all at once but in
segments. Preheating the surfaces to be joined,
e. g. with a hot air blower, increases the adhesive
force. Heat-sensitive materials should be checked
for their suitability.
Maintenance and environmental
protection
CAUTION! Electrical and battery operated
units that no longer work should not be
disposed of in the household
waste! They are to be collected
separately, in accordance with the
2002/96 EC directive for the
disposal of electrical and
electronic waste, and sent for
proper and environmentally-
friendly recycling.
Service instructions
• Store the machine, operating instructions and
where necessary the accessories in the original
packaging. In this way you will always have all
the information and parts ready to hand.
20