Targus USB 3.0 SUPERSPEED Guide De Démarrage Rapide page 5

DisplayLink™ Manager Menu
Menu Option
DisplayLink Manager
Check for Updates
DisplayLink devices
Audio Setup
Video Setup
Screen Resolution
Screen Rotation
Extend
Set as Main Monitor
Notebook Monitor
Off
Mirror
Off
Optimize for Video
Fit to TV
To Set the Display into
Extend Mode
1. Click on the DisplayLink icon
2. Select Extend in Manager Menu.
The device is now extended in the direction it was
the last time the display was in this mode. For more
control, use the Extend To submenu and select one
of the options. This puts the device into Extend Mode,
and places it to the Left/Right/Above/Below the main
monitor.
To Set the Display into
Mirror Mode
1. Click on the DisplayLink icon
2. Select Mirror in Manager Menu.
The resolution, color depth and refresh rate of the
primary screen are replicated on the monitorconnected
to the docking station.
Opens the Screen Resolution window
Checks online if new drivers are available to download
Shows a list of all connected DisplayLink devices
Opens the Audio Configuration window
Opens the Screen Resolution window
Shows a list of all available screen resolutions. Inferred Modes [ ] are not
available in mirror mode
Rotates the screen in clockwise or counter-clockwise directions
Extends the Windows desktop onto this display
Sets this screen as the main display
Switches off the laptop display and use the DisplayLink display as the
main screen (only works on PCs and when only one DisplayLink screen
is connected)
Shows the same content on both screens (screen resolutions must be
the same)
Turns off this DisplayLink display
Select for improved video playback on DisplayLink connected displays
(only applicable for video; text may appear less clear)
Adjusts the size of the Windows desktop to fit the connected TV (only
works when one DisplayLink display is connected and set in Extend
Mode)
.
.
Fit to TV Configuration
1. To configure Fit to TV, choose the option from the
DisplayLink Manager. The following interface appears.
2. You will also see a red border on the DisplayLink
screen.
The red border shows the size of the new Windows-
Desktop. Use the "+" and "-" controls to change the size
of the red border until it fits on the TV screen.
3. Once the red border is at the edges of the TV screen,
click "Apply" to resize the Windows desktop.
5
Back to Content