Lindy 43901 Manuel Utilisateur page 5

User Manual
Dual Display Installation
1. Power on your computer and connect the Thunderbolt Type C connector of the Adapter to a
Thunderbolt 3 equipped port.
2. Connect a standard DisplayPort Male/Male cable (not included) to the DisplayPort outputs of the
Adapter and to the input ports of your displays. If you are using 4K 60Hz graphics it is recommended
to keep the cable distance to 2m maximum)
3. Power on the displays and your computer will detect them as two separate displays which can be
configured in Display Settings as usual.
Single 5K Monitor Installation
1. Power on your computer and connect the Thunderbolt Type C connector of the Adapter to a
Thunderbolt 3 equipped port.
2. Connect a standard DisplayPort Male/Male cable (not included) to the DisplayPort outputs of the
Adapter and to the input ports of your 5K display. It is recommended to keep the cable distance to
2m maximum)
3. Power on the display and your computer will then detect it and allow it to be configured in Display
Settings as usual.
English