Tools Needed - Blackstone 1967 Manuel D'utilisation

Model 1967 | Owner's Manual | Assembly Guide
!
WA R N I N G
The manufacturer has made
every effort to eliminate any
sharp edges. However, you ASSEMBLY INSTRUCTIONS
should handle all compo-
Please read all instructions thoroughly before proceeding. Make sure all
nents with care to avoid
the plastic packing material is removed before assembling
accidental injury.
Find a large, clean area to assemble your griddle. Please refer to the parts list
Some parts may contain
and assembly diagrams as necessary.
sharp edges, especially
as noted in these instruc-
Griddle assembly involves large components; therefore, it is advised to
tions. Wear protective
have two people assemble the unit.
gloves if necessary.
!
WA R N I N G
The use of alcohol, prescrip-
S T E P 0 1
tion or non-prescription
drugs may impair the
down. Install one (1) upper right leg, one (1) left leg, and the front panel with
consumer's ability to prop-
four (4) M6x12 screws. (Do not tighten these screws yet.)
erly assemble or safely
operate the appliance.
!
C A U T I O N
Two people are recom-
mended for the assembly
of this product.
NOT INCLUDED: 20 lb LP gas tank
08
Remove the griddle body from the packaging and lay it upside
S T E P 0 2
Install one (1) left leg, one (1) upper right leg, and the back panel
with four (4) M6x12 screws. (Do not tighten these screws yet.)
S T E P 0 3
Remove the two lower
right legs from the box and insert
them into the upper right legs.
Assembly Guide | Owner's Manual | Model 1967
TOOLS NEEDED: Phillips Head
Screwdriver & Adjustable Wrench
09