Sonoff Slampher Instructions D'opération page 7

SONOFF TECHNOLOGIES CO., LTD.
Operating Instruction
1.
Install lamp base
To avoid electric shock, please turn off the power before installing the lamp base.
2. Download the eWeLink APP
3. Power on
After powering on, the device will enter the quick pairing mode (Touch) during the
first use. The Wi-Fi LED indicator changes in a cycle of two short and one long flash
and release.
The device will exit the quick pairing mode (Touch) if not paired within 3mins. If you
want to enter this mode, please long press the manual button for about 5s until the
Wi-Fi LED indicator changes in a cycle of two short and one long flash and release.
eWeLink
6
eWeLink
Android™ & iOS
English
OFF
ON