Technical Specifications - OOGarden 0165-0091 Mode D'emploi

INSTRUCTIONS ON ASSEMBLY AND USE
WARNINGS
Please read these instructions carefully. Please store them and the packaging
carefully in case questions arise in the future. This product must be assembled by
an adult. This product is designed for private/domestic use only. This product is not
designed for commercial/industrial use. The use of the product requires certain
capabilities and skills. Always adjust according to the age of the user and use for
the purpose it has been designed for.

TECHNICAL SPECIFICATIONS

Item: Soccer goal Freekick
Item number: CBL701F
Dimensions when assembled: 300 x 240 x 90 cm
Purpose: Soccer goal for versatile shooting and goalkee -
per training.
If you have assembly problems or would like further information on the product,
please contact customer service at (cdts@cdts.fr).
CONTENTS
Designation
N°
Straight tube
1
Straight tube
2
Straight tube
3
Straight tube
4
5
L Tube(high support)
a et b
Poteau Droit
6
L Tube(low support)
7
8
L Tube(low support)
9
Support tube
10 Support tube
11 Tool
Net
12
13 Nut
14 Washer
Screws 1,5 cm
15
Screws 6 cm
16
Screws 6,8 cm
17
18 Screws 8,5 cm
19 Net fixing rope
20 Floor fixing sheet
Other items included are meant to facilitate safe transportation and are not re
quired for the installation and use of the product.
SAFETY INSTRUCTIONS
• WARNING! Not suitable for children under 36 months. Long cord. Strangulati-
on hazard.
• Prior to use, check all parts of the goal for damages and correct assembly.
In this regard, it is important to check the connecting elements and screw
connection for stability and t. Any sharp edges that might have formed must
immediately be removed! Small parts. Choking hazard.
• Warning: do not climb on the goal frame or net or hang from the goal posts.
There is a serious risk of injury!
• Children should only use the product when they are under adult supervision.
• No liability is assumed for damages resulting from incorrect application of the
instruction manual.
All images are examples of the design.
Specification Quantity
104 cm 2
92cm 1
97cm 2
97cm 2
112 cm 2
93 cm 2
106 cm 1
106 cm
1
95 cm
2
101 cm
1
2
1
4
20
1,5 cm
2
6 cm
6
6,8 cm
4
8,5 cm
4
2
20 cm
3
INSTRUCTIONS ON ASSEMBLY
Notice: Lubricate the connection assemblies on the narrow ends a bit before
starting the assembly. That facilitates the assembly and extends the durability
of the product!
1. Assembly of the goal frame
First assemble all the round tubes (5-10) as shown in diagram 1. Make sure to use
the corresponding numbered tubes. Now screw the left post and the right post
together (3 and 4) and slide over the sleeves of the goal net. Screw the square
tubes 1 and 2 together and push them through the other innings of the goal net.
Here it is important that the net has been pulled previously back above the tubes
5a / 5b and 6 positioned. The net must be placed outside before xing the goal
crossbar. Screw the crossbar, the posts and the rest of the goal together. Attach the
net to the cage. Thread the rope around the tubes as shown in diagram 2 and tie
the two ends.
2. Stand locking of the goal
Finally x the goal cage to the ground using the ground xing plugs (20) as shown
in g. 3. Make sure the soil is suitable for the use of soil xing plugs (e.g. absence
of garden hoses).
Make sure that the oor xing plugs are well inserted in the ground and do not
exceed (at the risk of tripping). On harder soils, it is necessary to nd other ways to
x the goal cage in order to prevent it from tipping over and prevent possible
accidents. Never play with a goal cage that would not be well secured or left
unattended.
USAGE INSTRUCTIONS
• Only set up the goal on level ground.
• Please keep a minimum distance of at least 3 m to any surrounding obstacles.
• Secure the goal to keep it from toppling over – even if not in use.
• Avoid exposing the product unnecessarily to bad weather conditions. Keep it
in a cool and dry storage area.
• Check for any rust on the product and remove it immediately. Pushing together
the metal parts could lead to the protective layer being scratched and rust
developing.
MAINTENANCE AND STORAGE
Use a dry or damp cloth only to clean the product; do not use special cleaning
agents! Check the product for damage or traces of wear and tear before and after
each use. Do not make any structural changes. For your own safety, please use
original spare parts only. If parts become
should develop, the product may not be
contact our service team (cdts@cdts.fr).
Store the product in a safe place where it is protected from the elements, cannot
be damaged, and cannot injure anyone.
DISPOSAL ADVICE
At the end of the product's life, please dispose of it at an appropriate collection
point provided in your area. Local waste management companies will be able to
answer your questions on this.
SERVICE
We make every effort to deliver faultless products. If faults do arise however, we
put just as much effort into rectifying them. You can find numerous information
on the product, replacement parts, solutions to problems and lost assembly ma -
-
nuals by contacting customer service at cdts@cdts.fr
damaged or if sharp edges or corners
used any more. If in any doubt, please
Store the product in a safe place where
4/5