Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
OPERATING INSTRUCTIONS
1. Open the battery cover on the back side
of the Digital Control Display. Insert (1)
9V battery and replace the battery cover.
You can also connect the 9V AC adapter
to an outlet (Follow the outlet instructions
outlined in this instruction manual)
(FIGURE 1).
2. Place the scale on a level surface and
press the "ON/OFF" button to turn on
the scale. The Digital Control Display will
illuminate, displaying all controls. When
stabilized, it will display "0.00" (FIGURE 2).
3. Press the "MODE" button to change
the unit of measure (FIGURE 3).
Mode 1
(LB)
4. If the Digital Control Display does not display "0.00 LB / 0 LB 0 oz / 0.00
Kg", press the "TARE" button to reset the display to "0.00".
5. When the display shows
is running low and will need to be changed soon (FIGURE 4).
6
Mode 2
(LB:oz)
or "Lo", this is an indication that the battery
FIGURE 1
TIME
MODE
TARE
ON/OFF
FIGURE 2
FIGURE 3
Mode 3
(Kg)
FIGURE 4
Low Voltage
SET
Publicité
Table des Matières
