Using The Appliance - Philips GoStyler NT9141 Mode D'emploi

ENGLISH
6

Using the appliance

When you trim your beard for the first time, be careful and test the
appliance on a small part of your arm or leg. Do not move the trimmer
too fast. Make smooth and gentle movements.
If any irritation or allergic reaction occurs, discontinue use immediately.
Do no use the appliance on sensitive or irritated skin.
Trimming with the precision trimming head
With the precision trimming head without precision trimming comb, you
can trim hairs to a length of 1mm, the so-called 'stubble look'.
1 Put the precision trimming head on the appliance. Align the locking
indicator with the 'unlocked' indication (black upward arrowhead)
and put the attachment on the handle. Then turn the attachment
clockwise until the locking indicator points to the 'locked' indication (I).
2 Switch on the appliance. Turn the battery compartment cover from
the 'off' position (0) to the 'on' position (I).
3 Touch the hairs lightly with the precision trimming head and move it
against the direction of hair growth.
Note: You can use the precision trimming head with the trimmer teeth pointing
towards the skin. You can also use it with the flat part touching the skin and
the teeth pointing in the direction in which you move the appliance.
4 To switch off the appliance, turn the battery compartment to the 'off'
indication (0).