Hendi H90 Mode D'emploi page 8

Parts
All accessories such as trays, tray
handle, tray holders
External housing
Inside of the appliance
Glass door
Storage
• Always make sure the appliance has already been
disconnected from the electrical wall outlet and
cooled down completely.
Troubleshooting
If the appliance does not function properly, please
check the below table for the solution.
Problem
When connected to the electrical
power outlet, the control settings are
EN
made & indicator lights are on. But the
appliance does not heat up.
When connected to the electrical
power outlet, the control settings are
made. It heats up normally. But the
indicator is not on.
Neither the indicator nor the heating
element works.
Technical specification
Item no.: 227060
Operating voltage and frequency: 220-240V~ 50/60Hz
Power: 2670W
Net weight: Approx. 35kg
Protection class: Class I
Water protection class: IPX3
Outer dimension: 595x595x(H)570mm
Remarks: Technical specification is subjected to change without prior notification.
8
How to clean
- Soak in warm, soapy water for about
10 to 20 minutes
- Rinse under running water thor-
oughly.
- Wipe clean with a soft cloth and a
little mild detergent. Make sure no
water or moisture enters inside of
the appliance.
- Remove any food deposits.
- Wipe with a damp cloth and a little
cleaning detergent to remove any
spills or splatters.
- Note: Be sure not to damage the
heating elements.
• Store the appliance in a cool and clean place.
If you are unable to solve the problem, please con-
tact the supplier/service provider.
Possible cause
The thermostat is defeated
At least one of the heating element is
burnt out.
The indicator light is defective.
The power cord & plug is not connect-
ed firmly with the electrical power
socket.
Remark
Dry all parts well at last.
Possible solution
Take the appliance to your supplier or
service provider for repair.
Take the appliance to your supplier or
service provider for repair.
Check again the connection. And
make sure all the connections are
firmly connected.