Hendi H90 Mode D'emploi page 7

RESET with the SAFETY CUT-OUT
Please note that there is a SAFETY CUT-OUT device
for protection located at the lower rear side of the
appliance with a protective cap. This is to turn off
the appliance automatically when the temperature
is too high.
• Unplug the appliance from the electrical outlet
first.
Cleaning and Maintenance
Warning!
• Always disconnect the appliance and open the
door to allow it to cool down completely before
cleaning.
• Never use abrasive sponges or detergents, steel
wool or metallic utensils to clean the interior or
exterior parts of the appliance.
• Avoid the use of sprays as this may damage the
appliance's surface.
• Allow the appliance to completely cool down.
• Unscrew (tool not supplied) the black protective
cap of the "SAFETY CUT-OUT".
• Push the button to RE-SET the overload circuit.
You should hear a click sound.
• Screw back the protective cap on the "SAFETY
CUT-OUT" button.
• The appliance should be cleaned regularly and any
food deposits removed.
• Wipe out any remaining oil or fat.
• Note: The trays holder on two sides can be un-
screwed (tools not supplied) to detach for clean-
ing.
EN
7