Publicité
Les langues disponibles
Les langues disponibles
No.
Description
9
ON/OFF button
Oscillation
10
button
11
Down button
12
Up button
13
Mode button
14
Timer button
5. Installation
Take the appliance out of the packaging and remove any packaging material and
check the product for damage. The fan heater has to be placed on a flat surface.
Ensure that the heater is placed at least 1m away from other objects, and not
directly below a socket. A socket should be available for supplying power to the
appliance.
Caution! Ensure that the appliance is not placed near any flammable materials or
fluids, or with the air discharge pointing in this direction.
6. Initial use
Connect the appliance to a suitable socket. To start the appliance, set the ON/
OFF switch on the rear of the appliance to the "I" position and make sure that it is
placed on a flat and firm surface.
Switching on and off
Press the "ON/OFF" button (
of the fan heater to turn the appliance on or off. If the appliance is switched off,
the heating elements are switched off first. The fan will continue to rotate for
about 1 minute to cool itself down.
Mode selection
Select a heating mode using the "Mode" button (
Heat setting 1 "
" Heat setting 2 "
heat setting depending on how fast you want the fan heater to heat up to the
corresponding temperature.
32
Function
Switches the appliance on or off
Switches the oscillation on and off
Reduces the desired temperature
Increases the desired temperature
Changes the mode between heating mode 1, 2
and fan mode
Switches the timer on and sets the timer
) on the remote control or the control elements
" and the fan mode "
). You can choose between
". Select the
English
Publicité
