Connections - SEC DPP 1126-070 Manuel D'utilisation

Connections

A. For home use (the main unit)
On the back of the unit there is a bracket. When you pull out the
bracket, you can
place the main unit on the flat position to operate it.
Connect to power outlet
Connect the one terminal of the power cord to the DC IN jack on the
side of the unit and the plug to the power outlet.
The DVD player is ready to be set up for use.
·Risk of product damage! Ensure that the power supply voltage corresponds to the voltage range
for the DVD player.
Connect Video/Audio cables
Make the following basic connections to
use the DVD player.
Connect the video/audio cable to the AV OUT jack on the side of the main unit.
· Video/Audio cables
Audio left channel (WHITE)
If you want to enjoy high quality music or enjoy home theater effect, you can select connection 1.
Connect USB device/Memory card
Connect the USB flash drive to the USB
jack on the side of the DVD player or insert the memory card to the SD/MMC/MS interface.
Note:
·This DVD player can only play/view MP3 or JPEG files that are stored on such devices.
·Press USB/CARD button on the remote control to select the mode to play the files on the USB or
memory card.
Playback Vedio
divx4.0/5.0/6.0、xvid6.0、MP4、VOB、dat、MPG、MPEG 1、MPEG2
Audio right channel (RED)
13
Video channel (YELLOW)