Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
General safeguards
•
Use this laminator only for its intended
purposes as according to the specifications
outlined in the operating instructions.
•
Keep hands, long hair, loose clothing and
articles such as necklaces or ties away from
the front of the rollers and heatshoe to avoid
entanglement and entrapment.
•
When opening the top door of the laminator,
avoid contact with the heatshoe and rollers
when laminator is powered on or shortly after
the laminator has been turned off. The
heatshoe can reach temperatures in excess of
270º F / 132.2° C.
•
Keep hands and fingers away from the path of
the sharp film cutter blade located at the film
exit.
•
Do not place the laminator on an unstable
cart, stand or table. An unstable surface may
cause the laminator to fall resulting in serious
bodily injury. Avoid quick stops, excessive
force and uneven floor surfaces when moving
the laminator on a cart or stand.
•
Do not defeat or remove electrical and
mechanical safety equipment such as
interlocks, shields and guards.
•
Do not insert objects unsuitable for
lamination.
•
Do not expose laminator to liquids.
Electrical Safeguards
•
The equipment should be connected to an
easily accessible and grounded (3-pin)
receptacle (socket outlet) near the
equipment.
•
This laminator must be connected to a supply
voltage corresponding to the electrical rating
as indicated on the serial plate located on the
rear of the machine.
•
Unplug the laminator before moving it, or
when it is not in use for an extended period
of time.
•
Do not operate the laminator with a damaged
power supply cord or plug.
•
Do not overload electrical outlets as this can
result in fire or shock.
•
Do not alter the attachment plug. This plug is
configured for the appropriate electrical
supply.
•
The unit is intended for indoor use only.
•
Disconnect the attachment plug from the
receptacle to which it is connected and keep
the power supply cord in your possession
while moving the laminator.
•
Do not operate the laminator with a damaged
power supply cord or attachment plug, upon
occurrence of a malfunction, or after
laminator has been damaged. Contact
an authorized GBC service
representative for assistance.
CAUTION: The receptacle must be located
near the equipment and easily accessible. Do
not use an extension cord.
GBC Technical Service
To order replacement accessories, service, parts,
or an Equipment Maintenance Agreement, please
contact GBC Technical Service and Support at:
United States
ACCO Brands GBC Technical Service and Support
4 Corporate Drive Lake Zurich, IL 60047-8997
www.gbcconnect.com
1-800-723-4000
Canada
1-800-463-2545
callcentre@GBCCanada.com
Mexico
(55) 1500 5778
Lada SIN costo: 01 800 759 6825
serviciotecnico@acco.com.mx
Publicité
Table des Matières
