Bio Green HK 4.3 Mode D'emploi page 15

Heating Cable HK
5. Cleaning, Repair and Disposal
•
Do not use any abrasive, corrosive or cleaning agents.
•
Always remove the mains plug before cleaning the cable.
•
Only use a damp cloth to clean the housing.
•
When disposing of devices, always take them to an appropriate
collection site.
•
Repairs may only be performed on the device by approved
specialists. You should therefore contact the manufacturer or
distributor in such an event.
•
Please note:
rendered null and void.
•
Improperly executed repairs may represent a hazard both for the
user and other persons.
6. Warranty and Maintenance
All BioGreen products are covered by a 2 year unlimited manufacturer's
warranty (from date of purchase). This excludes damage due to use of
force, improper use, or failure to follow these operating instructions or
the instructions relating to cleaning and maintenance.
The manufacturer accepts no liability for any damage due to frost,
inadequate heat output, or due to inadequate heat insulation.
Important Note
Opening of the device and any repair work may only be performed by
approved specialists
specifications. Only original parts may be used on the device.
We can only guarantee problem-free operation and reliability if the
device is installed and used properly. This also applies in regard to the
statutory provisions relating to technical production equipment as well as
current accident prevention legislation.
If you have any further questions, please contact our BioGreen service:
In the event of improper repair, the warranty is
in compliance
Tel: +49 (0)6444 / 9312-0
info@bio-green.eu
15
with the relevant repair