Changing The Source Device/Disconnecting; Turning The D Fine Off - Dockin D FINE Mode D'emploi

After successful pairing, the blue LED on your D FINE stays lit and
you will hear a confirmation sound.
Connecting via NFC function:
This function is only available if your device supports NFC ( Near Field
Communication ).
1. Activate Bluetooth® on the source device (Bluetooth®
settings).
2. Activate NFC on the source device.
3. Hold your source device close to the NFC logo on top of the
D FINE. First time connection via NFC needs to be confirmed on
your source device.
After successful NFC pairing, the blue LED on the D FINE stays lit
and you will hear a confirmation sound.

CHANGING THE SOURCE DEVICE/DISCONNECTING

To select a new playback device while still paired, the current
Bluetooth® connection needs to be disengaged.
• Disconnect the current Bluetooth® connection on the source
device.
or
• Push and hold the button on your D FINE for approx. 3
seconds.
TURNING THE D FINE OFF
• Hold the
seconds to switch the D FINE off.
button on the top of your D FINE down for 3
13