Samsung RT16A61 Série Manuel D'utilisation page 29

A
Untitled-1 29
A
B
A
A
24. Use a flat-head screwdriver to remove
the middle-hinge screw cap (A), and
then reinsert it on the opposite side.
25. Use the flat-head screwdriver to remove
the flange-screw cap (A) to reveal
the flange screw (B). Use a Phillips
screwdriver to remove the flange screw
(B), and then tighten it on the opposite
side. Finally, close the flange-screw cap
(A) on the opposite side.
26. Flip the middle hinge (A) 180 degrees
as shown.
27. Fasten the middle hinge (A) on the
opposite side.
NOTE
When you reverse the door to open from
the right, you must attach the middle hinge
prior to the bottom hinge.
English 29
2021-07-30 10:37:35