Install; Connections With An Amplifier - Onkyo NS-6130 Mode D'emploi

> Before Start > Part Names

Connections with an amplifier

Install

1
a
2
a
a Analog audio cable, b Digital coaxial cable
> Install > Initial Setup
NS-6130
You can play the audio from network features such as
internet radio through speaker systems connected to pre-
main amplifiers or AV receivers. Connect to suit the input
jacks on your amplifier.
Connecting with an analog audio cable
The signal is converted to analog in the D/A converter of
this unit and then output to the pre-main amplifier. Connect
> Playback
Advanced Setup | Firmware Update | Others
OR
b
2
Integrated amplifier, AV receiver, etc.
the LINE IN jacks on a pre-main amplifier with the included
analog audio cable to the AUDIO OUTPUT ANALOG jack
on this unit.
Connecting with a digital coaxial cable
The signal is converted to analog in the D/A converter of
the pre-main amplifier. Connect the COAXIAL IN jacks on a
pre-main amplifier with a digital coaxial cable to the AUDIO
1
a
E
N
7