Servicing Menu; Treatment Screens - ResMed VPAP III Manuel Utilisateur

Servicing Menu

Table 6: Servicing Menu
Function
Serial
Number (SN)
Printed Circuit
Board (PCB)
*
Software
* This item also appears in the Standard Menu.

Treatment Screens

After starting treatment, you can display one of the treatment screens below.
Press the Up/Down key to switch between views.
Ramping indicator
Treatment mode
Trigger indicator
Pressure bar graph
Figure 3: Treatment screen 1
Leak
Minute
ventilation
Figure 4: Treatment screen 2
Cycle indicator
(TiMn / C / TiMx)
Trigger indicator
Measured
inspiration time
Figure 5: Treatment screen 3
The treatment screens contain the following information:
Treatment mode: Mode of treatment set by your clinician. Options include:
CPAP, Spontaneous, Spontaneous/Timed (VPAP III ST) and Timed
(VPAP III ST).
Function Description
Displays the serial number for the VPAP .
Displays the printed circuit board number.
Displays the current software version
installed in the VPAP .
S:RAMP
S>>>>>
LK: 24L/min
MV: 12.0
S ∗ ∗ C TiMx 2.0
Ti 1.5s
Set pressure(s)
8.0–16.6
exit
Respiratory rate
RR: 12
Tidal volume
VT:1000
Set IPAP Max
1:2.5 Measured I:E ratio
How to Use the VPAP Menus
Setting Options
View only
View only
View only
27