Start Guide; Menu System - Nibe POOL 40 Manuel Installateur

Program setting of POOL 40 can be performed via the
start guide or directly in the menu system.

Start guide

The start guide appears upon first start-up after heat
pump installation, but is also found in menu 5.7.

Menu system

If you do not make all settings via the start guide or need
to change any of the settings, this can be done in the
menu system.
MENU 5.2 -SYSTEM SETTINGS
Activating/deactivating of accessories.
(Applies to NIBE F1145/F1155 and F1245/F1255)
MENU 5.2.3 DOCKING
Setting the system docking.
(Applies to NIBE F1345/F1355 and SMO 40)
MENU 5.2.4 -ACCESSORIES
Activating/deactivating of accessories.
(Applies to NIBE F1345/F1355 and SMO 40)
MENU 4.1.1 - POOL
Activating pool heating and setting start and stop tem-
perature.
MENU 5.1.11 - PUMP SPEED HEATING
MEDIUM
Setting heating medium pump's speed.
Caution
Also see the Installer manual for the product
that POOL 40 will be connected to.
POOL 40
Control voltage
kV value
s
Connection valve (Ø mm)
Part No.
22
230 V 50 Hz
8,6
28
067 062
POOL 40 | GB