Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Deutsch
English
6.
Temperature loads
Operating / ambient conditions
ƒ
Standard: 5 ... 55 °C; IP 54; 93 % rel. humidity
ƒ
Sealed: 5 ... 55 °C; IP 68; 93 % rel. humidity
Media temperatures
Coniguration
Heat - battery supplied
Heat - externally supplied
Cold - battery supplied
Cold - externally supplied
Only in riser / downpipe or in horizontal, tilted installation position
1)
Note that in heat applications, the water temperature must be
greater than the ambient temperature.
Once commissioned, avoid frost at the meter.
Use unsealed low sensors:
ƒ
at water temperatures permanently above ambient temperatures
Use sealed low sensors:
ƒ
For cold applications or T
ƒ
If permanent condensation is expected
7.
Declaration of Conformity for devices according to MID
Diehl Metering GmbH hereby declares that these products conform to the
essential requirements of the following directives:
ƒ
EMC Directive (2004/108/EC)
ƒ
R&TTE Directive (1999/5/EC)
ƒ
MID Directive (2004/22/EC)
ƒ
DE-07-MI004-PTB022 DE-09-MI004-PTB011
ƒ
EC type examination certiicate
The signed declaration of conformity is displayed on Page 9.
Further information is available under www.diehl.com/metering
Pусский
Français
Temperature range
5 ... 90 °C / 5 ... 105 °C
0.6 ... 2.5 m³/h:
q
p
3.5 ... 60 m³/h:
q
p
5 ... 90 °C / 5 ... 105 °C
5 ... 120 °C
< T
water
ambient
1)
5 ... 130 °C
5 ... 150 °C
1)
-15-
Publicité
Table des Matières
