Speedlink Despina SL-8133 Mode D'emploi page 4

Audio connection
D
GB
F
E
I
•Connect the plug of the connection cable to either of the
following:
1.Audio output from Sound Blaster, Ad Lib, Audio Wave and
other PC compatible Sound Cards.
2.Audio output from Macintosh and other computer units.
• Connect the speaker connection cable to the "TO LEFT SP"
jack at the back of the right speaker.
• If a headphone is connected to the headphone jack of the right
speaker, the speakers will be set to mode "mute".
Controls
1."Power Switch"
Press switch once to turn on power, green indicator will be
illuminated. Press the switch again to turn unit off.
2. "Volume Control"
Turn the knob clockwise to raise the volume, or counter
clockwise to lower it.
3."Tone Control"
Turn the knob clockwise for a higher tone or counter clockwise
to raise the bass effect.
6 7
D
GB
F
E
I