Service Instructions; Service Schedule - Timberwolf TW 280TVGTR BROYEUR Mode D'emploi

SERVICE INSTRUCTIONS

SERVICE SCHEDULE

SERVICE SCHEDULE
Check coolant level.
Check radiator is clear.
Check engine oil - top up if necessary (10W-30).
Check for engine oil / hydraulic oil leaks.
Check fuel level.
Check hydraulic oil level.
Check feed funnel, feed roller cover, access covers,
engine covers and discharge unit are securely fitted.
Check blades.
Check air intake is clear.
Clean air filter element.
Check safety bar mechanism.
Check for tightness all nuts, bolts and fastenings
making sure nothing has worked loose.
Grease discharge flange.
Check tension of main drive belts (and tension if
necessary).
Grease the roller box slides.
Grease the roller spline and bearing.
Check anvils for wear.
Check fuel pipes and clamp bands.
Check for loose electrical wiring.
Replace track drive unit oil
Replace hydraulic oil filter - every year or 100 hours
after service or repair work to the hydraulic system.
Replace hydraulic oil.
Grease tandem pump spline drive
Replace fuel pipes and clamp bands.
Check coolant condition.
Change engine oil.
Replace engine oil filter cartridge.
Check valve clearance.
Replace anvils when worn.
C190-0176
15 / 73
Daily 50
Check Hours
ü
ü
ü
ü
ü
ü
ü
ü
ü
DEPENDING ON WORKING ENVIRONMENT
ü
ü
ü
ü
ü
OR AS REQUIRED - SEE PAGE 21
ü
OR AS REQUIRED - SEE PAGE 21
ü
REFER TO YOUR ENGINE SUPPLIER'S MANUAL
RETURN TO DEALER FOR ANVIL CHANGE
01.03.2019
TW 280TVGTR
100 500
Hours Hours
ü
ü
FIRST TIME THEN
ü
ü
ü
OR
ü
OR
1
Year
OR
ü
ü
ü
ü
Rev: 2.0