Control Panel; Delay Start - Samsung DMT800 Série Manuel D'utilisation

setting up your dishwasher

CONTROL PANEL

DMT800 Series
1
7
DISPLAY
1

DELAY START

2
SANITIZE
3
8_ setting up your dishwasher
DMT800_DD68-00050A-05_EN_20120921.indd Sec3:8 DMT800_DD68-00050A-05_EN_20120921.indd Sec3:8
2 3 4
8
Displays wash information (Delay start hours, Child lock/unlock, Low rinse),
and error messages.
When Low rinse remains illuminated, there is no rinse agent in the dispenser.
Refi ll the rinse aid dispenser.
If an error occurs during an operation, an error message is displayed with a
warning sound. Refer to the Information codes page. (see page 25)
Delay a cycle for up to 24 hours in one-hour increments. The hour displayed
indicates the time at which the wash will be started.
The temperature rises to 162 ˚F (72 ˚C) in the fi nal rinse cycle for high
temperature sanitization.
If you select the Sanitize option, the "Sanitize" lamp blinks when the water
temperature reaches the sanitary temperature (over 155 ˚F (68 ˚C)), and then
remains illuminated until the Sanitze option ends. When you open the door
or press Power button, the "Sanitize" lamp turns off.
You cannot select the Delicate cycle if you select the Sanitize option.
The Sanitize feature is in accordance with NSF/ANSI Standard 184
for Residential Dishwashers. Certifi ed residential dishwashers are not
intended for licensed food establishments. Your dishwasher is NSF
Certifi ed.
The cycle that is NSF certifi ed is the Heavy Cycle with the sanitize option
selected.
5 6
9
2012-09-21 2012-09-21 2:08:40 2:08:40