Honeywell VisionPRO TH8320WF Mode D'emploi page 8

System setup
Function
0530
Adaptive Intelligent
Recovery
0580 Compressor
protection
0600 Heat temperature
range stop
Cool temperature
0610
range stop
0640
Clock Format
0650
Extended fan
timer (heat)
0660
Extended fan
timer (cool)
0670
Keypad lock
0680
Heat temperature
control
0690
Cool temperature
control
0695
Finish On High
Heat Stage
0696
Finish On High
Cool Stage
0700
Temperature
display offset
0710
Restore Original
Settings
0890
Wi-Fi On/Off
0900
Wi-Fi Connection
69-2733EFS—05
Settings & Options
1 On
0 Off
5 5 minute compressor off time
[Other options: 0, 1, 2, 3 or 4-minute off time]
90 Max. heat temperature setting is 90°F (32°C)
[Other options: 40-89°F (4°C to 32°C)]
50 Min. cool temperature setting is 50°F (10°C)
[Other options: 51-99°F (11°C to 37°C)]
12 12-hour clock (i.e., "3:30 pm")
24 24-hour clock (i.e., "15:30")
0 Off
90 Fan runs for 90 seconds after call for heat ends
[Other options: 30, 60, 120]
0 Off
90 Fan runs for 90 seconds after call for cooling ends
[Other options: 30, 60, 120]
0 Keypad unlocked (fully functional)
1 Partially locked (access to temperature settings only)
2 Fully locked
2 Standard temperature control (recommended)
1 Choose if room is warmer than set temperature
3 Choose if room does not reach set temperature
2 Standard temperature control (recommended)
1 Choose if room is cooler than set temperature
3 Choose if room does not reach set temperature
0 No
1 Yes
0 No
1 Yes
0 Thermostat displays actual room temperature
[Other options: -3, -2, -1, 1, 2, 3°F offset (-1.5°C to 1.5°C)]
0 No
1 Disconnects thermostat from Wi-Fi and restores original settings (erases
customizations).
1 Wi-Fi is on and can be connected to a Wi-Fi network.
0 Wi-Fi is off. Thermostat cannot be connected to a Wi-Fi network. If you
are not connecting the thermostat to a Wi-Fi network this will remove the
text "Wi-Fi Setup" from the messaging center.
1 Connected to Wi-Fi network. This is set automatically when the
thermostat is connected to the Wi-Fi network.
0 Set to 0 to disconnect from the Wi-Fi network.
8