Honeywell TH8320WF Guide De Démarrage Rapide

This is a legacy product document
supported by Resideo. It is no
longer manufactured
1
Connect to your Wi-Fi network
1.1 Connect to your thermostat
1.1a Connect your wireless device to
your home network.
Any of these device types
will work:
• Tablet (recommended)
• Laptop (recommended)
• Smartphone
View the Wi-Fi Enrollment video
at wifithermostat.com/videos
1.1b Make sure the thermostat message
center displays Wi-Fi SETUP.
1.1c On the wireless device (tablet,
laptop, smartphone), view the
list of available Wi-Fi networks.
1.1d Connect to the network called
NewThermostat_123456
(the number will vary).
Note:
If you are asked to specify a home,
public, or office network, select
Home Network.
1.2 Join your home network
1.2a Open your web browser to access
the Thermostat Wi-Fi Setup page.
The browser should automatically
direct you to the correct page; if it
does not, go to http://192.168.1.1
1.2b Find the name of your home network
on this page and select it.
Note: Some routers have enhanced
features such as guest networks; use
your home network.
1.2c Complete the instructions for joining
your Wi-Fi network and click on the
Connect button. (Depending on your
network setup, you may see an
instruction such as Enter Password
for your home network.)
Note:
If you did not correctly connect to
the thermostat, you may see your home
router page. If so, return to Step 1.1.
1.3 Make sure your thermostat is
connected
The message center on your thermostat
will now display CONNECTING... for up to
30 seconds.
1.3a Look at the thermostat display.
Verify that the message center
displays one of the following:
CONNECTION SUCCESSFUL
JOINED: [WI-FI NETWORK NAME]
YOU ARE ALMOST DONE
REGISTER AT TOTAL CONNECT
If you see one of these messages,
continue to Step 2 .
Apple, iPhone, iPad, iPod touch and iTunes are
trademarks of Apple Inc. All other trademarks
are the property of their respective owners.
Automation and Control Solutions
Honeywell International Inc.
1985 Douglas Drive North
Golden Valley, MN 55422
http://yourhome.honeywell.com
® U.S. Registered Trademark.
© 2012 Honeywell International Inc.
69-2735EF—01 M.S. 08-12
Printed in U.S.A.
Quick Start Guide
VisionPRO Wi-Fi
Programmable
Thermostat
Model TH8320WF
Getting Help
If you get stuck... At any point in
this process, restart the thermostat
by removing the thermostat from
the wallplate, wait for 5 seconds,
and snap it back into place.
.
Return to 1.1
Need more help? Find additional
information in the User Guide.
Message Center
Inside
MORE
Thermostat Wi-Fi-Setup page
Inside
MORE
Note: If you see CONNECTION
FAILURE or Wi-Fi SETUP in
the message center, confirm
you correctly entered your home
network password in step 1.2c. If
correct, refer to the FAQ at
wifithermostat.com/support
69-2735EF-01
Setting Up Your Thermostat
1
2
2
Register online for remote access
To view and set your Wi-Fi thermostat remotely,
you must have a Total Connect Comfort
account. Follow the instructions below.
View the Wi-Fi Thermostat Registration
video at wifithermostat.com/videos
2.1 Open the Total Connect Comfort
web site
Go to www.mytotalconnectcomfort.com
2.2 Login or create an account
If you have an account,
click Login
– or –
click Create An Account.
2.2a Follow the instructions on the
screen.
2.2b Check your email for a response
from My Total Connect Comfort.
This may take several minutes.
Note:
If you do not receive a response,
check your junk mailbox or use an
alternate e-mail address.
2.2c Follow activation instructions
the email.
2.2d Log in.
2.3 Register your Wi-Fi thermostat
After you are logged in to your Total
Connect Comfort account, register
your thermostat.
2.3a Follow the instructions on
the screen. After adding
your thermostat location
you must enter your
thermostat's unique
identifiers:
• MAC ID
• MAC CRC
Note: These IDs are listed on the
Thermostat ID Card included
in the thermostat package.
The IDs are not case sensitive.
2.3b Notice that when the thermostat
is successfully registered, the
Total Connect Comfort
registration screen will display
a SUCCESS message.
In the thermostat message
center you will see:
CONGRATULATIONS
SETUP COMPLETE!
2.3c Also notice that your thermostat
will now display its signal strength.
Congratulations! You're done.
You can now control your
thermostat from anywhere
through your tablet, laptop, or
smartphone.
Total Connect Comfort free app
is available for Apple ® iPhone
® ®
iPad and iPod touch devices
at iTunes ® or at Google Play
™
for all Android devices.
GET IT ON
Connect it to your home Wi-Fi network.
Register online for remote access.
Before you begin, you may want to view our
installation video by scanning this QR ®
specification or visiting wifithermostat.com
in
Thermostat ID Card
Use the MAC ID and CRC ID to register
this product at mytotalconnectcomfort.com
HONEYWELL MODEL: TH8320WF
MAC ID:
Carte d'identification de thermostat
Utilisez l'identification MAC et l'identification CRC pour
enregistrer ce produit à mytotalconnectcomfort.com
Tarjeta de identificación del termostato
Utilice la identificación MAC y la identificación CRC para
inscribir este producto en mytotalconnectcomfort.com
® U.S. Registered Trademark.
© 2012 Honeywell International Inc.
69-2723EFS—01 M.S. 04-12
Printed in U.S.A.
MAC ID MAC CRC
® ,
®
Download on
iTunes
Code
MAC CRC:
69-2723EFS-01