Beper 40.801B Manuel D'instructions page 6

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Body scale Use instructions
NOTE:
BEFORE USING THE SCALE, REMOVE THE PLASTIC FOIL TO ACTIVATE LITHIUM
CELLS OR THE SCALE WILL NOT OPERATE.
Features
This scale's weighing is quick and precise. It is one of your perfect household articles with its high
reliability, long durability and low energy consumption .
Cautions
The scale will be slippery when it is wet. Keep it dry!
This product can only be used by static pressure. To avoid breaking by striking, shocking or drop-
ping. Clean your scale with a damp cloth but avoid water getting inside the scale. Do not use che-
mical cleaning agents. The scale should not be soaked by water.
Keep your scale in a cool place with dry air instead of humid or hot place.
Keep the scale in horizontal position.
This scale can only be used for weighing human body. Do not use it for commercial purpose.
Treat your scale carefully. Do not drop it or jump on it.
Operation
The scale should be placed on a hard flat surface. Never touch any other object.
Step directly on the glass surface of the scale, it will appear " HI " on LCD until a stable reading is
displayed. Otherwise you can tap the surface till LCD displays "0.0" then step on for weighing ope-
ration.
Put your feet evenly on the glass surface without moving and wait or impact your weighing accuracy.
If you remain standing on the scale after your weight has shown, your weight will continue to display
for 10 seconds and then turn off automatically.
If you step off of the scale immediately after your weight has displayed, your weight will continue to
display for 3 seconds before returning to zero and then turn off automatically.
While the scale is turn off, turn the scale over and press the only switch located on the back of it. The
scale will choose and remember weighing unit "kg"-"lb"- and " st " in turn.
NOTE: IF NOT IN USE FOR LONG TERM, MAKE SURE NO OBJECTS ON THE SURFACE OF
THE SCALE THEN TAP ON THE LOWER CORNER OF THE SCALE. THE SCALE WILL CALI-
BRATE THE ZERO POINT TILL "0.0" APPEARANCE.
Specifications
Capacity : 150kg
Division : 100g
Reliable 6mm
Power supply: 1x 3V lithium cells
Low power indicator: (Loo)
Over load indicator : (Err)
Automatic switch off
For any improvement reasons, Beper reserves
the right to modify or improve the product
without any notice.
6

Publicité

Table des Matières
loading

Table des Matières