Yealink SIP-T58A WITH CAMERA Guide De Démarrage Rapide page 7

6. Connect the AC power or PoE, as shown below:
Ｄ Ｃ ５ Ｖ
Ｐ Ｃ Ｉ ｎ ｔ ｅ ｒ ｎ ｅ ｔ
Note:
The IP phone should be used with Yealink original power adapter (5V/2A) only. The use of the third-party power adapter may
cause the damage to the phone.
7. Connect to the network, as shown below:
You have two options for network connection. You can select one of them according to the current office environment.
a) Connect to the wired network:
Ｄ Ｃ ５ Ｖ
Ｐ Ｃ
Ｉ ｎ ｔ ｅ ｒ ｎ ｅ ｔ
Note:
If you are connecting a PC to your phone, we recommend that you use the Ethernet cable provided by Yealink.
b) Connect to the wireless network:
1) Swipe down from the top of the screen to enter the control center.
2) Tap Setting->Basic->Wi-Fi.
3) Tap the On radio box in the
The phone will automatically search for available wireless networks in your area.
4) Select an available wireless network from the list of networks.
5) If the network is secure, enter its password in the
6) Tap Connect to connect to the wireless network.
A
AC Power Option
B
PoE ( Power over
Ethernet ) Option
Wi-Fi field.
Password
Ｄ Ｃ ５ Ｖ
Ｐ Ｃ Ｉ ｎ ｔ ｅ ｒ ｎ ｅ ｔ
Ｄ Ｃ ５ Ｖ
Ｐ Ｃ Ｉ ｎ ｔ ｅ ｒ ｎ ｅ ｔ
IEEE 802.3af compliant
PoE Hub/Switch
PC
PC Connection
(Optional)
Ｄ Ｃ ５ Ｖ
Ｐ Ｃ Ｉ ｎ ｔ ｅ ｒ ｎ ｅ ｔ
field.
Power Adapter
(DC 5V)
E
N
G
L
I
S
H
3