ims PRO POWERDUCTION 10R Notice Originale page 8

Translation of the original instructions
SAFETY INSTRUCTIONS
This manual contains safety and operating instructions, to be follo-
wed for your safety. Please read it carefully before using the device
for the first time and keep it in a safe place for future reference.
Read and understand the following safety recommendations before
using or servicing the unit. Any change or servicing that is not spe-
cified in the instruction manual must not be undertaken. The manu-
facturer is not liable for any injury or damage caused due to non-
compliance with the instructions featured in this manual . If there is
any issue or uncertainty, please consult a qualified individual to
operate the equipment correctly. This machine should only be used
for operations comprised within the limits indicated on the machine
and in the instruction manual. The operator must observe the safety
precautions. In case of inedaquate or unsafe use, the manufacturer
cannot be held liable for damage or injury. Any other uses not spe-
cified in this manual is forbidden, and possibly dangerous. The
product is semi automatic and requires the presence of an operator.
This unit can be used by children aged 8 or over and by people
with reduced physical, sensory or mental capabilities or lack of ex-
perience or knowledge, if they are properly monitored or if instruc-
tions for using the equipment safely have been read and risks made
aware of. Children must not play with the product. Cleaning and
maintenance should not be performed by an unsupervised child.
Ne pas utiliser l'appareil, si le cordon d'alimentation ou la fiche de
secteur sont endommagés.
Ne pas couvrir l'appareil.
Do not obstruct the cooling vents. Refer to the installation section
before operating the machine.
Fire and explosion risks!
• Do not use the device in an explosive atmosphere.
• Keep airbags, gas cannisters or other pressurised gas containers
away from the induction heating machine.
Warning, heat and flame risk.
• Do not overheat parts and adhesives.
• Be wary of fire, keep a fire extinguisher is in the vicinity..
• Do not position the machine on, or near flammable surfaces.
• Do not position the machine near flammable materials.
Warning ! Very hot surface. Risk of burns.
• The parts and pieces that have just been heated are hot and
may cause burns when manipulated.
• Do not touch any hot parts with your hands.
• Wait for the parts and pieces to cool down before handling them.
8
POWERDUCTION 10R
EN