ims PRO POWERDUCTION 10R Notice Originale page 10

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
Translation of the original instructions
After maintenance, the magnetic field levels must be checked be-
fore the machine is used again.
When switched on, never put the inductor near the head or vital
organs.
People wearing pacemakers are advised to not come close to the
machine. Risk of disruption of pacemaker operations when close
to the machine.
Consult a doctor before getting close to induction heaters.
Risk of metal or adhesive projections
• Wear approved protective goggles with lateral protections, or
protect the whole face with a screen.
• Wear protective clothes.
• Wear gloves.
Do not obstruct the machine's air intake, which facilitates air circu-
lation. Check the installation chapter before using the device.
Connection:
• This machine must be connected to an earthed socket.
• These Class A devices are not intended to be used on a residenti-
al site where the electric current is supplied by the public network,
with a low voltage power supply. There may be potential diffi-cul-
ties in ensuring electromagnetic compatibility on these sites, be-
cause of the interferences, as well as radio frequencies.
Maintenance:
• If the power cable is damaged, it must be replaced by the manu-
facturer, its after sales service or an equally qualified person to
prevent danger.
•Service should be performed by a qualified person.
• Warning! Always disconnect from the mains before performing
maintenance on the device. High Voltage and Currents inside the
machine.
• Remove the casing on a regular basis, to remove any excess dust.
Take this opportunity to have the electrical connections checked
by a qualified person, with an insulated tool.
• Do not use solvents or any agressive cleaning products.
• Clean the device's surfaces with a dry cloth.
Regulations:
• Device complies with europeans directives.
• The certificate of compliance is available on our website.
• EAC Conformity marking (Eurasian Economic Community).
• Equipment in compliance with British requirements. The British De-
claration of Conformity is available on our website (see home
page).
10
POWERDUCTION 10R
EN

Publicité

Table des Matières
loading

Table des Matières