Dyna-Glo Pro RMC-KFA45DGP-01 Manuel De L'utilisateur Et Instructions D'utilisation page 12

NEVER LEAVE THE HEATER
UNATTENDED WHILE BURNING!
E.) NOZZLE
REMOVE DIRT IN NOZZLE AS NEEDED (SEE PAGE 16).
(For RMC-KFA75TDGP-01/125TDGP-01 Models Only)
- Remove upper shell (See page 10).
- Remove fan blade (See page 10).
- Remove fuel and air line hoses from burner head.
- Remove ignition wire from spark plug.
- Remove three screws using medium Phillips screwdriver
and remove burner head from combustion chamber.
- Remove spark plug from burner head using medium
Phillips screwdriver.
- Carefully remove nozzle from burner head using 5/8"
socket wrench.
- Blow compressed air through face of nozzle. (this will
remove any dirty in nozzle)
- Reinstall nozzle into burner head and tighten firmly.
(80~110 inch-pounds)
- Reinstall spark plug in burner head.
- Attach burner head to combustion chamber.
- Attach ignition wire to spark plug.
- Attach fuel and air line hoses to burner head.
- Reinstall fan blade and upper shell.
(For RMC-KFA210TDGP-02 Model Only)
- Remove upper shell (See page 10).
- Remove fan (See page 10).
- Remove fuel and air line hoses from adaptor-nozzle.
- Remove ignition wire from spark plug.
- Remove four screws using medium Phillips screwdriver
and remove burner-bracket from combustion chamber.
- Remove spark plug from burner head using medium
Phillips screwdriver.
- Carefully remove nozzle from adaptor-nozzle using 5/8"
socket wrench.
- Blow compressed air through face of nozzle.
(this will remove any dirt in nozzle)
- Reinstall nozzle into adaptor-nozzle and tighten firmly.
(80~110 inch-pounds)
- Reinstall spark plug in spark-bracket.
- Attach burner-bracket to combustion chamber.
- Attach ignition wire to spark plug.
- Attach fuel and air line hoses to adaptor-nozzle.
- Reinstall fan blade and upper shell.
Nozzle Face
Nozzle
Figure 17. Nozzle Replacement
Fuel Line
Fitting
Air Line Fitting
Figure 18. Nozzle Replacement
11
Combustion Chamber
Screw
Ignition Wire
Burner Head
Fuel Line
Air Line
Spark Plug
Burner Head
Combusion chamber
Burner Bracket
Spark Plug
Ignition Wire
Screw
Fuel Line Hose
Air Line Hose
Bracket Burner
Nozzle Face
Nozzle
Spark Plug
Bracket Spark