STEINEL Gluematic 3002 Mode D'emploi page 8

Operation / Function
L Attach wire stand and insert glue sticks
into the heating channel at the back.
L Rest applicator on wire stand (placing
a piece of cardboard or wood under-
neath it if necessary).
L Let the applicator heat up for approx.
7 minutes.
L Press trigger and apply glue to one side.
L Firmly press together the materials
being glued, correcting alignment if
necessary.
L Final bonding strength is reached after
a very short time (approx. 2 minutes)!
Tool features
1. Nozzle (can be change on Gluematic 3002)
2. Trigger
3. Power cord
Applications for Gluematic 3002
L Making floral wreaths and flower arrangements
L Repairing wooden drawers
L Making greeting cards
Applications for Gluefix
L Making greeting cards
L Making hair accessories
L Making floral wreaths and flower arrangements
Disposal
Electrical and electronic equipment, ac-
cessories and packaging must be recycled
in an environmentally compatible manner.
Do not dispose of electrical and
electronic equipment as domestic
waste.
L Spot gluing is recommended on long
items with large surfaces.
L Rigid foam (e.g. polystyrene) can also
be glued without a problem. Merely
remember to apply the hot glue on the
base surface and not on the polysty-
rene.
L When gluing textiles or similar materials,
it is recommended to apply the hot glue
in "wavy" lines.
L After use, set tool on stand
and let it cool down.
EU countries only:
Under the current European Directive on
Waste Electrical and Electronic Equipment
and its implementation in national law,
electrical and electronic equipment no
longer suitable for use must be collected
separately and recycled in an environmen-
tally compatible manner.
- 14 -
Technical specifications
Gluematic 3002
Warm-up time: approx. 7 min.
Melting temperature: 206 °C
Delivery rate: 16 g/min
Dimensions (L × W × H): 175 × 30 × 125 mm
100 – 240 V (variable
Power supply:
without a change-over)
Warming-up
Output: Idle approx.
In use approx.
Weight: 320 g
Genuine STEINEL and
Glue sticks:
Henkel glue sticks
Manufacturer's warranty
This STEINEL product has been manufac-
tured with utmost care, tested for proper
operation and safety and then subjected
to random sample inspection. STEINEL
guarantees that it is in perfect condition
and proper working order.
The warranty period is 36 months and
starts on the date of sale to the consumer.
We will remedy defects caused by material
G B
flaws or manufacturing faults. The warran-
ty will be met by repair or replacement of
1
defective parts at our own discretion.
Y E A R
If this tool's connection lead is damaged,
it must only be replaced by a repair work-
MANUFACTURER'S
shop specified by the manufacturer.
WARRANTY
Gluefix
7 – 8 min.
200 °C
13 g/min
175 × 30 × 125 mm
100 – 240 V (variable
without a change-over)
200 W Warming-up 175 W
16 W Idle approx. 16 W
45 W In use approx. 40 W
300 g
Genuine STEINEL and
Henkel glue sticks
Subject to technical modifications
The warranty shall not cover damage to
wear parts, damage or defects caused
by improper treatment or maintenance.
Further consequential damage to other
objects shall be excluded.
Claims under the warranty will only be
accepted if the unit is sent fully assembled
and well-packed with a brief description
of the fault, a receipt or invoice (date of
purchase and dealer's stamp) to the
appropriate Service Centre.
5
3
Y E A R Y E A R
MANUFACTURER'S MANUFACTURER'S
WARRANTY WARRANTY
- 15 -