STEINEL Gluematic 5000 Mode D'emploi page 7

Safety precautions
Do not use electric pow-
er tools when they are
damp or in a damp or
wet environment. Exer-
cise care when using the
tool in the proximity of
flammable materials. Do
not direct the tool at one
and the same place for a
prolonged period. Do not
use in the presence of an
explosive atmosphere.
Heat emitted may be
conducted to flammable
materials that are hidden
from direct sight.
Protect yourself
from electric
shock.
Avoid coming into contact
with grounded objects,
such as pipes, radiators,
cookers or refrigerators.
Do not leave the tool
unattended while in
operation.
Store your tools in
a safe place.
After use, set the tool
down on its standing sur-
face and let it cool before
putting it away.
When not in use, tools
must be stored in a dry,
locked room out of chil-
dren's reach.
This tool may be used by
children aged 8 or above
and by persons with re-
duced physical, sensory
or mental capabilities or
lack of experience and
knowledge if they are
supervised or have been
given instructions on how
to use the tool safely and
understand the hazards
involved.
Do not allow children to
play with the tool.
Children are not allowed
to clean or carry out
maintenance work on the
tool without supervision.
- 12 -
Safety precautions
Do not overload
your tools.
Your work results and
safety will be enhanced if
you operate the tool with-
in the specified output
range. Do not carry the
tool by the power cord.
Do not unplug the tool
by pulling on the power
cord. Protect the power
cord from heat, oil and
sharp edges.
Beware of toxic
gases and fire
hazards.
Toxic gases may develop
when working on plastics,
paints, varnishes or simi-
lar materials.
Beware of fire and ignition
hazards.
For your own safety, on-
ly use accessories and
attachments that are
specified in the operating
instructions or recom-
mended or specified by
the tool manufacturer.
Using attachments or
accessories other than
those recommended in
the operating instructions
or catalogue may result in
personal injury.
Repairs by a quali-
fied electrician only
This electric power tool
complies with the rele-
vant safety regulations.
Repairs should only be
performed by a qualified
electrician. Otherwise the
user may run the risk of
accidents. If the tool's
power cord is damaged,
it must be replaced with
a power cord of the same
quality.
Keep these safety
precautions with
the tool.
- 13 -