Factory Reset; Ec Declaration Of Conformity - Berner BACR 18V Notice Originale

Factory reset

A factory reset clears all user defi ned settings, replacing them with the
original default values, so time/date, preferences/settings, DAB station
list and preset stations are all lost.
MAINTENANCE
If the supply cord of this appliance is damaged, it must only be
replaced by a repair shop appointed by the manufacturer, to avoid
hazardous situations.
Use only Berner accessories and spare parts. Should components
need to be replaced which have not been described, please contact
one of our Berner service agents (see our list of guarantee/service
addresses).
If needed, an exploded view of the tool can be ordered. Please state
the ten-digit No. as well as the machine type printed on the label and
order the drawing at Berner.
SYMBOLS
CAUTION! WARNING! DANGER!
Always disconnect the plug from the socket before
carrying out any work on the machine.
Please read the instructions carefully before starting
the machine.
Do not dispose of electric tools together with
household waste material! In observance of European
Directive 2002/96/EC on waste electrical and
electronic equipment and its implementation in
accordance with national law, electric tools that have
reached the end of their life must be collected
separately and returned to an environmentally
compatible recycling facility.
Class II tool, tool in which protection against electric
shock does not rely on basic insulation only, but in
which additional safety precautions, such as double
insulation or reinforced insulation, are provided.
There being no provision for protective earthing or
reliance upon installation conditions.
This tool is only suitable for indoor use. Never expose
tool to rain.
Do not burn used battery packs.
Never charge a damaged battery pack. Replace by a
new one.
European Conformity Mark
457 118 - Berner - BACR 18V.indd 23 457 118 - Berner - BACR 18V.indd 23
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that the product described
under Technical Data fulfi lls all the relevant regulations and the
directives 2011/65/EU (RoHs), 2014/53/EU and the following
harmonized standards have been used:
EN 60065:2014
EN 55032:2015
EN 55020:2007+A11:2011+A12:2016
EN 61000-3-2:2014
EN 61000-3-3:2013
EN 62311:2008
EN Final draft 303 345 V1.1.7 (2017-03)
EN 50581:2012
The notifi ed body SGS UNITED KINGDOM LIMITED [0890] performed
the EU-type examination and issued the EU-type examination
certifi cate: 233061/121/GZ
Künzelsau, 2017-06-09
i.V. Bert Habets
Senior Director Continuous Improvements
Authorized to compile the technical fi le
Berner Trading Holding GmbH
Berner Straße 6
D-74653 Künzelsau
GUARANTEE AND GUARANTEE SERVICE
Each tool, spare part or accessory is consistently checked before
being dispatched from the manufacturing plant. If, despite this fact,
there are any defects, please send the item directly to our Client
Services Headquarters or to the nearest service repair shop of the firm
Berner.
The warranty period of 36 months for tools and 12 months for batteries
and chargers starts on the date of purchase which must be verifi ed
using the original receipt. During the guarantee period the producer
guarantees:
• free removal of possible defects;
• free replacement of all damaged parts;
• free professional servicing.
The requirement for this is that the problem is a material and/or
manufacturing fault. Defects or faults caused by incorrect treatment or
excessive force are not covered by the warranty. Furthermore, only
original accessory parts may be used, which Berner has expressly
identifi ed as suitable for the operation with Berner machines.
You can fi nd out the location of your nearest customer service
workshop in the address list at the back of this document.
23 ENGLISH
18.07.2017 14:08:26 18.07.2017 14:08:26