Fellowes POWERSHRED 79Ci Mode D'emploi page 3

BASIC SHREDDING OPERATION
PAPER OR CD/CARD
1
Continuous operation:
12-minute maximum
NOTE: Shredder runs briefly
after each pass to clear entry.
Plug in and put
Continuous operation beyond
disconnect power
12-minutes will trigger
switch in ON (I) position
20-minute cool down period.
ADvANCED PRODUCT FEATURES
Jam Proof System
Elimimates paper jams and powers
through tough jobs.
JAM PROOF SYSTEM OPERATION*
Eliminates paper jams and powers through tough jobs.
Advanced Jam Prevention- Electronically
1
measures paper thickness to prevent paper jams:
If a misfeed
occurs:
*100% Jam Proof when used in accordance with user manual
SAFESENSE TECHNOLOGY OPERATION
®
Stops shredding immediately when hands touch the paper opening.
SET-UP AND TESTING
1
2
Turn the shredder ON Touch test area and
( ) to activate SafeSense look for the SafeSense
®
indicator to illuminate
2
Press ( ) ON to
activate (blue)
Up to RED: Too many
sheets have been inserted.
Up to YELLOW: Productivity
is optimized.
Up to GREEN: More sheets
can be added.
All indicators light up and
shredder pauses for 3-6 seconds
3
SafeSense is active and
®
working properly
®
3
4
or
Feed paper straight into To shred CDs rotate
paper entry and release CD flap into place
Patented SafeSense Technology
®
Stops shredding immediately when
hands touch the paper opening
2
Remove several sheets until
indicator is below red.
Wait for flashing to stop after automatic correction
is complete. Regular shredding will resume.
5 6
Hold CD/card at edge, When finished
feed into CD/Card flap shredding set
entry and release to OFF ( )
SilentShred™ Technology
SilentShred™ noise quality
shreds without noisy disruptions
3
Continue 100% Jam
Proof Shredding
If illuminates after paper has been
reversed, press reverse and remove paper.
Otherwise, regular shredding will resume.
3