Klarstein 10031698 Mode D'emploi page 15

1
4
7
15
Installation
fasten lock
1. The cooker hood should be placed at a distance of 15mm from the wall at
least. (See Pic1)
2. Put moderate glass cement on the edge of the panel bottom(See pic 3), and
put the hood into the hole of the cabinet.(See pic 2) Use 4pcs screw ST4*8
and screw ST4*14 & fixing knock to fix the hood.(See pic 4)
3. Fix the outlet on the casing by 4pcs screw ST4*8. (See pic 5)
4. Connect the casing & hood by 8pcs screw M10*10, the wind direction
are up, down, left, right, the user can select according to the space of the
cabinet.(See pic 6)
5. Fix the pipe on the outlet, and use 4pcs screw ST4*14 to fix the PCB box,
connect the power and finish the installation.(See pic 7)
2
Outlet
Casing
5
3
6