Energy Saving Mode; Factory Settings - Medicap RECOVERY Manuel D'installation

EN

ENERGY SAVING MODE

1
FACTORY SETTING
1
Turn the appliance off
using the main switch (I).
5
The reset is done.
WWW.MEDICAP-NUTRITION.COM
ENERGY SAVING MODE / FACTORY SETTING
Save energy!
After 15 minutes no usage, the appliance is going in "Energy save mode".
In this mode all the warming function are disabled. The user interface is
showing each buttons blinks circularly To exit from "energy save mode"
open the handle or press one of buttons . All the buttons will be steady
light and this means the appliance is now ready to use
2
Turn the RECOVERY
on when the button is
pressed. Release the
button after 3 seconds or
when you hear two beep
sounds. The reset is done.
3
Release the button after
3 seconds or when you
hear 2 beep sounds. The
reset is done.
4
Turn the machine off
and on using the main
switch (I).
RECOVERY 37