Technical Data; Safety Instructions; Ec Declaration Of Conformity; English - Milwaukee WT 10 Notice Originale

TECHNICAL DATA

High Pressure Water Tank
Production code
Max. filled capacity
Total contents approx.
Max. permissible pressure
Max. flow capacity
Max. permissible temperature
Technical residual quantity

SAFETY INSTRUCTIONS

Checking the safety valve the safety valve is in good working order
when it opens or discharges at 6 bar. Defective safety valves must
be replaced immediately.
Should there be any evidence of damage to the tank (dents or
splits), it should be replaced immediately. Do not use a tank that has
been repaired.
GB
GB
Water tanks still under pressure must not be exposed to open
sunlight for longer periods of time.
Clear out the sprayer every day after use. Never leave any residues
in the appliance.
This water tank must be protected from frost.
SPECIFIED CONDITIONS OF USE
The High Pressure Water Tank is suitable for use as a supply of water
during wet-cutting operations with drilling equipment.
Do not use this product in any other way as stated for normal use.
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that the product described
under "Technical Data" fulfills all the relevant provisions of the
directives 2014/68/EU have been used.
Winnenden, 2018-03-01
MAINTENANCE
Use only Milwaukee accessories and Milwaukee spare parts. Should
components need to be replaced which have not been described,
please contact one of our Milwaukee service agents (see our list of
guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please
state the Article No. as well as the machine type printed on the
label and order the drawing at your local service agents or directly
at Techtronic Industries GmbH, Max-Eyth-Straße 10, 71364 Win-
nenden, Germany.

English

8
WT 10
4336 35 02...
...000001-999999
10 l
13 l
6 bar
4,52 l/min - 6 bar
+50 °C
< 0,04 l
SYMBOLS
0091
Please read the instructions carefully before
starting the machine.
CAUTION! WARNING! DANGER!
Do not fill with flammable liquids!
European Conformity Mark
TÜV / GS Conformity Mark