Table des Matières
Publicité
Operating
Operating
Never reach under the unit while the high-pressure cleaner is operating
•
Never direct the 14" Whirl-A-Way at humans or animals.
•
Do not operate on a ladder.
Nozzle has been set according to factory set alignment.
During operation, should you experience a buildup of small stones or other
foreign material within the cover, we recommend that you simply tip the
cleaner on its side at 45° which should expel any foreign materials. This
extend the life of your tips and swivel arm. The tips that have been installed
on your surface cleaning system permit the use of your cleaner with a
pressure washer producing up to 4 GPM at 4000 PSI. Periodically check
the tips to ensure they are not plugged by dirt particles. It is very important
when operating your 14" Whirl-A-Way, that you maintain a continuous
motion.
Should you leave the cleaner in a stationary position, the surface being
cleaned can be seriously damaged by the high pressure.
Recommended Applications
use with a gun and lance
Connect to lance using q/c fittings on the lance and 14" Whirl-A-Way.
Attach to long wand
Attach to a longwand for cleaning hard to reach surfaces. Connect to
longwand using the QC fittings on the longwand and 14" Whirl-A-Way.
operating
WARNING
7
Publicité
Table des Matières
