Table des Matières
Publicité
Liens rapides
Publicité
Table des Matières
Sommaire des Matières pour BE 14 WHIRL-A-WAY
- Page 1 14” WHIRL A-WAY operation manual Model # 85.403.014...
-
Page 3: Table Des Matières
table of contents Introduction Using the Operator’s Manual Product Identification Record Identification Numbers Pre-Operating Instructions Before You Begin Intended Use Care Operating Operating Recommended Applications Use with a Gun and Lance Attach to Long Wand Parts List Parts List Warranty Warranty... -
Page 4: Introduction
Using the Operator’s manual The operating manual is an important part of your 14” Whirl-A-Way and should be read thoroughly before initial use, and referred to often to make sure adequate safety and service concerns are being addressed. Reading the owner’s manual thoroughly will help avoid any personal injury or damage to your Whirl-A-Way. -
Page 5: Product Identification
product identification Record Identification Numbers 14” Whirl-A-Way If you need to contact an Authorized Dealer or Customer Service line (1-866-850-6662) for information on servicing, always provide the product model and identification numbers. You will need to locate the model and serial number for the pump and record the information in the places provided below. -
Page 6: Pre-Operating Instructions
operating instructions Pre-Operating Instructions Before You Begin Prior to initial operation of the unit carefully read the information outlined in the operation instructions. • Ensure that all components are in good working order and that they operate safely. • Do not use cleaner if any part is not in proper working condition. •... -
Page 7: Operating Operating
14” Whirl-A-Way, that you maintain a continuous motion. Should you leave the cleaner in a stationary position, the surface being cleaned can be seriously damaged by the high pressure. Recommended Applications use with a gun and lance Connect to lance using q/c fittings on the lance and 14”... -
Page 8: Parts List
parts list Parts List - Part no. 85.792.037 A. Durable Nylon Brush Skirt - Part no. 85.790.038 B. Heavy Duty Polypropylene Cover - Part no. 299-1090 C. 4,000PSI Rotary Head, 180°F - Part no. 299-1086 D. Rotary Arm... -
Page 9: Warranty
warranty Warranty The rotary head has a six-month warranty from the date of purchase. Should you encounter problems with the rotary head within that time period, contact the place of purchase for RGA and return with authorized RGA. If you encounter problems after the six month period has lapsed, a rotary head repair kit is available. - Page 10 If you need assistance with the assembly or operation of this Whirl-A-Way please call 1-866-850-6662...