Table des Matières
Publicité
Pre-Operating Instructions
Before You Begin
Prior to initial operation of the unit carefully read the information
outlined in the operation instructions.
• Ensure that all components are in good working order and that they
operate safely.
• Do not use cleaner if any part is not in proper working condition.
• No modifications permitted on the machine.
• Before operation test the cleaner at low pressure (1500 PSI) to ensure you
can operate safely at high pressures.
This product uses extreme water pressure and water force. This may
cause kickback when using the cleaner.
The surface Cleaning System you have purchased connects directly to a
1/4" quick connect coupler, operating to a maximum of 4000 PSI.
This 14" Whirl-A-Way is designed to operate with cold water pressure
washers. We do not recommend the use of hot water as the nylon brush
skirt will soften and wear prematurely, voiding any warranty.
Before operation ensure that the pressure washer is on low pressure when
first using the Whirl-A-Way. Adjust pressure with adjustable unloader.
Intended Use
The Whirl-A-Way is suitable for cleaning floors and walls in conjunction
with a high pressure cleaner.
(A) Recommend Operating pressure: 2000-3600 PSI
(B) Maximum pressure: 4000 PSI
(C) Maximum water temperature: 85°C/180°F
• Never exceed maximum operating pressure and temperature.
Care
•Protect from frost/ freezing.
•Ensure bristles are not deformed during storage.
Please dispose of packaging environmentally responsibly
The packaging materials are recyclable. Please do not throw the packaging
in the household rubbish but take it to a recycling centre.
6
-
pre
operating instructions
WARNING
Publicité
Table des Matières
