Operating Instructions; Adjusting Your Hearing Aids With Smart Control - Unitron Smart Control Mode D'emploi

Operating instructions

Before using your Smart Control, turn on your
hearing aids to ensure they are able to receive
the Smart Control commands.
Smart Control is designed to be used comfortably
in your hand at a maximum distance of one arm's
length. You do not have to point the remote at
your hearing aids. Placing the remote control
directly next to or too close to your hearing aids
may decrease the remote's effectiveness.
Selecting which hearing aid to adjust
At the top of the remote control, there is a
Left-Both-Right switch. This switch allows you
to select the hearing aids you want to adjust.
Slide the switch to the left position
adjust your left hearing aid only. The left (blue)
indicator light will flash to indicate your left
hearing aid is being adjusted.
Slide the switch to the right position
adjust your right hearing aid only. The right
(red) indicator light will flash to indicate your
right hearing aid is being adjusted.
10
Smart Control
(Available with Quantum
to
to
Slide the switch to the center position
adjust both your hearing aids. Both indicator
lights will flash to indicate your left and right
hearing aids are being adjusted at once.
Adjusting your hearing aids with
Your Smart Control provides backlighting when
it is first turned on and each time a button
is pressed, allowing you to see the remote
buttons in dimly lit environments.
Scroll wheel comfort-clarity setting
and 12, Passport , Latitude
™
Next 16 hearing aids)
™
The scroll wheel allows you to manage
the levels of speech and background
noise in your hearing aids and provides
an additional fine tuning adjustment beyond a
traditional volume control.
Scroll the wheel up slowly to increase the
clarity of sounds, such as speech.
to
20 and 12, Moxi 20
™ ™
16, Yuu and
™ ™
11