Grizzly Tools CT 2000 Li Traduction De La Notice D'utilisation Originale page 60

GB
• Never let children or persons
who are not familiar with the
instructions mentioned use the
machine.
PREPARATION
• Before each use, carry out a
visual inspection on missing
or wrongly mounted protective
devices or parts of the cutting
device.
• Before commissioning and af-
ter any impacts, check for signs
of wear and damages, and
have any necessary repairs
performed.
OPERATION
• Wear safety goggles, stable
shoes and long trousers over
the entire period of use of the
machine.
• The use of the machine under
bad weather conditions, espe-
cially in case of lightning risk,
must be avoided.
• Warning! Do not touch any
moving dangerous parts before
the battery has been removed
and the moving dangerous
parts have come to a complete
stop.
• Caution, risk of injury from cuts
on hands and feet.
• Stop using the machine when
persons, above all children,
and house pets are in the vicin-
ity.
60
• Use the machine only in day-
light or with good artificial light-
ing.
• Always keep your hands and
feet away from the cutting
equipment, above all when you
switch the motor on.
• Never install metallic cutting el-
ements.
• Never use the machine with
damaged or missing protective
equipment.
• Avoid an abnormal body pos-
ture. Ensure secure footing at
all times to maintain balance
when working on slopes.
• Go slowly. Do not walk with the
device in your hand.
• Always wear sturdy shoes and
long trousers during operation
of the machine.
• In the case of an accident
or malfunction during op-
eration, the device must be
switched off immediately.
Injuries must be properly
treated or medical assistance
sought. Read the „Trouble
shooting" section to correct any
malfunctions or contact our
Service Centre.
• Do not use any accessories
that are not recommended by
PARKSIDE. This can result in
electric shock or fire.