Arjohuntleigh Bedside Cabinet Notice D'utilisation page 9

4.4 Castors – replacement
4.4.1 Removal
a)
Turn the Bedside Cabinet onto its back or one side so that the underside is accessible.
b)
Use a 19mm spanner to loosen the castor stem. Unscrew the castor (09-1)(09-2)(09-3) from
the base.
When replacing the long stem castors (09-1), remove only one castor at a time as
these castors attach the corner extrusions (01-2)(01-3) to the base (01-9)
4.4.2 Replacement
a)
Turn the Bedside Cabinet onto its back or one side so that the underside is accessible.
b)
Position the castor (09-1)(09-2)(09-3) over the corner extrusion. Use a 19mm spanner to
tighten the castor stem.
Caution
7 416288-INT1 Rev A