Electromagnetic Fields (Emf); Before First Use - Duronic AF1 Mode D'emploi

Electromagnetic Fields (EMF)

This product conforms to the electronic magnetic field (EMF) related
standards. If used correctly according to the instructions of the user manual,
this product is safe.

Before First Use

1 Take away all the packaging material.
2 Remove the sticker or label from the appliance.
3 Use hot water, washing liquid and non-abrasive sponge to thoroughly clean
the frying basket and pan.
Note: You can also use the dishwasher to clean the components part.
4 Wipe the appliance inner part and outer part with a wet cloth.
This is a no oil Air Fryer. Do not fill the frying pan with oil.
To Use
1 Place the appliance on a horizontal or a stable surface.
Do not put the appliance on non-heat resistance surface.
2 Properly place the fry basket in frying pan. (figure 3)
Pull the power cord out of the cord storage part in the bottom of the
appliance.
Do not fill the frying pan with oil or other liquid.
Do not place any item on top of the appliance to cut off the airflow and
influence the hot air heating.
10
The Use Of This Product
Air Fryer can be used for cooking many ingredients. The enclosed recipe
book will help you understand the product and what is made with it. Please
check image figures at the end of this manual to relate to the below points.
1 Insert the plug into the earthed wall socket
2 Carefully pull the frying pan from the appliance. (figure 4)
3 Put the ingredients in the fry basket. (figure 5)
Note: Do not put the ingredient exceeding the MAX indicator line or more
than indicator table (refer to the chapter of the "Setting"), because this may
affect the frying result.
4 Slide the frying pan back to the Air Fryer. (figure 6)
Never use the frying pan without the fry basket.
Note: Do not use or touch the frying pan, because it is very hot. Kindly hold
the handle when removing the frying pan.
5 Adjust the temperature control knob to the required temperature. Please
refer to the chapter of the "Setting" part to determine the right temperature.
(figure 7)
6 Determine the time required for cooking ingredients (please refer to the
chapter of the "Settings" part)
7 To switch on the appliance, please adjust to the necessary timer knob to
cooking time. (figure 8)
If the appliance is cold, the cooking time should be increased by 3
minutes.
Note: You can also preheat the appliance before putting in the ingredients by
adjusting the timer knob about 3 minutes, and wait for the heating indicator
light goes out (about 3 minutes). Then put in the frying basket and adjust the
timer knob to the cooking time.
· at this time, the power cord indicator and the heating indicator will light up.
(figure 9)
· timer will countdown from set cooking time.
· Appliance process when heating indicator light up and goes out from times
to times. This means that heating element in constant on and off, in order to
maintain the temperature.
· Excess oil is collected on the bottom of frying pan.
11