Philips Sonicare ProtectiveClean 6100 Serie Mode D'emploi page 20

20
English
Battery status and charging
Battery status (when handle is not on charger)
1 Put the plug of the charger in an electrical
outlet.
2 Place the handle on the charger.
- The charger will emit 2 short beeps to
confirm that the handle is placed
properly.
- The flashing light of the battery level
indicator shows that the toothbrush is
charging.
- When handle is fully charged on the
charger, the battery light shows solid
green for 30 seconds and switches off.
Note: Your toothbrush comes pre-charged for
first use. After first use, charge for at least 24
hours.
When removing the Philips Sonicare from the
charger, the battery light at the bottom of the
toothbrush will indicate the status of the
battery life.
- Solid green LED: full battery
- Flashing green LED: medium battery
- Flashing amber LED and three beeps: low
battery
- Flashing amber LED and five beeps: No
brushing sessions left (charge toothbrush)