Responsibility Limitations; Transport And Storage; Packing Disposal; Equipment Disposal Information - tecnodent SERENITY NEXT Mode D'emploi

1.5. R
ESPONSIBILITY LIMITATIONS
The Manufacturer must be relieved of any responsibility in the following cases:
▪
Improper use or usage by untrained personnel for professional use;
▪
Use contrary to the applicable standards;
▪
Improper installation, if it is not specifically included in the supply contract;
▪
Power supply failure or defects;
▪
Lack of maintenance or servicing;
▪
Unauthorized modification or interventions;
▪
Use of non-original spare parts, or not model-specific;
▪
Failure to comply with the instructions (even partially);
▪
Exceptional events.
1.6. T
RANSPORT AND STORAGE
The equipment, if contained in its original packaging, may be exposed for a period of no more than 5 weeks to environmental
conditions within the following ranges:
Environment temperature:
Relative humidity (condensation included):
Atmospheric pressure:
1.7. P
ACKING DISPOSAL
All materials used for packaging are recyclable and respect the environment:
▪
Wooden pallet with fumigation treatment;
▪
Cardboard box;
▪
Polythene film or bubblewrap.
Please deliver the packing to an authorized landfill, for the recovery of these materials.
1.8. E
QUIPMENT DISPOSAL INFORMATION
According to the article 13 of D.lgs. no. 151, dated July 25
2002/96/EEC and 2003/108/EEC, concerning the reduction of hazardous substances in electric and electronic equip-
ment, as well as waste disposal", and subsequent modifications such as D.lgs. no. 49, dated March 14, 2014, "Imple-
mentation of the Directive 2012/19/EEC concerning waste of electric and electronic equipment", Tecnodent states as
follows.
▪
This symbol, placed in the identification label, indicates that the product at the end of its useful life must be disposed sepa-
rately form other waste.
▪
The separate collection of end-of-life equipment is organized and managed by the manufacturer. The owner who wishes to
dispose this equipment should contact the manufacturer or one of its representatives to allow separate collection of this end-
of-life equipment.
▪
The correct separate collection for recycling, processing and environmentally friendly disposal helps avoiding potential ad-
verse effects on human health, and promotes reuse and recycling of the equipment materials.
▪
Illegal disposal of the product by the owner will lead to penalties, as determined by the laws in force.
▪
If the product is placed out of use at the end of its working life, it is necessary to definitely put it out of service, by disconnecting
the plug from the socket and cutting the power supply cable.
.
.
.
.
Min
-40° C
10%
500 hPa (mbar)
, 2005, "Implementation of the Directives 2002/95/EEC,
th
– 32 –
Operating instructions
Max
+70° C
95%
1060 hPa (mbar)