Ⅱ Wireless Remote Controller Yt1F; Function Of Press Buttons - Gree XK19 Manuel D'utilisateur

Wireless Remote Controller YT1F
Ⅱ Wireless Remote Controller YT1F
Notes:
Be sure that there are no obstructions between the receiver and the remote controller;
① .
Do not drop or throw the remote controller;
② .
Do not let any liquid into the remote controller and expose the remote controller to direct
③ .
sunlight or any place where is very hot.
This is a general use remote controller. If press some button which is not available for the
④ .
corresponding function, the unit will keep the original running status.

1 Function of Press Buttons

1) ON/OFF ( )
Press this button to turn on/off the unit. After that, the sleep function will be canceled but the
preset time is still remained.
2) MODE
Auto, Cool, Dry, Fan, Heat modes can be selected circularly by pressing this button. Auto mode
is the default after power on. Under Auto mode, the temperature will not be displayed. Under Heat
mode, the initial value is 28℃ (82 ℉ ); Under other modes, the initial value is 25℃ (77 ℉ ).
Auto
Cool
Dry
Fan
Heat(Only for the cooling and heating unit)
Fig.17
17